CNG NG-

NG CNG kit for MPFI engines is a combination of various components. Each of these components is made as per international standard keeping safety and performance both at priority. These components are made to work in synergy with each other resulting in smooth performance and excellent economy. Following are the main components


Reducer / Vaporizer-


It is a High Tech & highly efficient device for reducing the CNG pressure from 200 bar to almost 1 bar. It is a three stage vaporiser ensuring full perfoamance and optimum mileage. Its each and every component is made as per stringent quality standard in air controlled, dust free environment. Excellent machining and special corrosion resistant passivation of all its internal parts make it a class apart from other reducers.


Injector Imitator-


It is an electronic device which is must to maintain the life of original ECM of your vehicle. It avoids cutting of lot of critical wires by providing socket to socket connections. It also helps in smooth running of vehicle by sending required signals to ECM of your vehicle.


Air Fuel Mixer-


Specially designed, Powder coated Vehicle specific Mixers of NG Gas kit help you to run your vehicle with optimum blend of Pick up and Mileage.


Tubing (Steel pipe)


ARAI approved, thoroughly tested, tubes are used to transfer fuel from tank to reducer.. All pipes are PVC coated for further safety. Similarly to transfer coolant and low pressure CNG vapors, braided hoses are used.


Tank valve-


Forged, toughened brass valves, capable of handling 300 bar pressure are used to control flow of CNG in cylinders. The filling valve is also made of forged brass and tested thoroughly.


Filling Valve


CNG filling valve provide a sale inlet so that CNG can be filled in helps gas to circulate and move in and out of the tank. This is also made of Forged and toughened brass.


Level meter


CNG level meter gives an output of level of CNG in the cylinder. It can be seen on provided dial as well as on Switch at dashboard.


Switch-


Specifically designed NG branded switches are made on automated machines ensuring endurance and reliability for long lasting use. It has three way functionality giving driver a power to select fuel type while running as well as while starting the vehicle. It also directs operations of your fuel pump of petrol while running on CNG, thus ensuring safety of petrol related components also.


CNG Tank


CNG is stored in strong seamless containers at a pressure of 200 bar (2900 psi),CNG in any approved cylinder is highly safe.CNG cylinders are put through exhaustive and extreme tests which include firing bullets at the canister, roasting it over a roaring bonfire and impact tests in which a crane drops the cylinder at multiple impact points. The rigorous manufacturing process backed with stringent testing norms make it safer than gasoline / Petrol tanks.Raghav LPG always provide fresh and approved Cylinders along with its kit and care should be taken to avoid use of old and re worked cylinders as they may not be tested for safety.


Hardware Pouch


Hardware pouch is combination of various small parts of standard quality required for complete fitment of a kit. It contains clamps, nuts, ferrule, cable tie, connector, steel screw and plastic cover to tie kit's parts easily. Though these items sound simpler but use of excellent quality of hardware material is very important for long life of kit and fitment.